• This New retrofit flow control panel will upgrade your 7MC or 7MC II with the 9MC flow meters, in a matter of minutes!
• The original 7MC Flow meters were not adjustable nor were they accurate; not even close to a measurable printed value!
• The 7MC was never repeatable from place to place or booth to booth
• Parameters had to be developed from one booth to the next. Watch out if the gas pressure were changed
• Sulzer Metco did realize this and developed the 9MC control console; which is very accurate with the set of flow meters chosen for it.
• As a calibration group, we have approved the quality of the Metco 9MC. We wanted to improve the robust Metco 7MC and 7MC II to match the quality of the Metco 9MC by using the same type of flow meters. The Flow Meters of the 7MC are now obsolete and they were not accurate; yet your console is still robust and useful with this modification!

When your people install this 9MC upgrade flow panel into your 7MC you now can use Oerlikon Metco’s 9MC parameters with Oerlikon Metco style guns. Your operators can now maintain the pressures with regulators supplied on the front of this flow panel; they will adjust pressure as well as scfh flow to the scale [adjustable] alongside the tube for flow indication. We can calibrate your 7MC upgraded system to within 2%.

As the operator adjusts the gas flows he can also adjust pressures at the same time to maintain very accurate and repeatable flows within the flow and pressure design of the tube. This is one step above the Metco 9MC, because we have put the regulators right in front of the operator, for adjustment of pressure as he adjusts the parameter flows. There is no reason to not be perfect on pressure and flow settings, we have made this possible on the 7MC console!